Facebook Pixel

Toyota Supra A90 Rear Suspension Drop Knuckle Kit

1,770.00€
excluding VAT
In stock
SKU
WFA91
or View Spares

The Toyota Supra A90 is one of the most discussed new cars around. Rear wheel drive together with turbocharged in-line six engine offers great potential for drifting. Here at Wisefab we have developed PRO level rear suspension kit for this chassis. It allows to gain more grip ans stability over the OEM setup. This kit has been tested in Japan and USA by the best drivers around and we are happy to offer this product now to our customers.

All the metal components on Wisefab A90 front suspension are from high strength steel, including sheet metal components, tubes, tube ends and rod end housings. Rod ends and spherical bearings are used, no rubber bushings.

Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!

Check out the 2020 Toyota Supra Lock kit!

Scroll down to order your spare parts conviently right here!

Read full description
  • Revised kinematics, not just dropped knuckle. 
    If the focus is more towards performance, then the car can act better with lowered ride height, but then the factory designed kinematics wouldn't work as it supposed to. The kit would give a good kinematics with lowered car - higher roll center, , revised cambergain, anti-squat and bumpsteer for maximum grip.
  • Easy camber adjustment.
    As the top links are straight tubular type, then camber can be adjusted simply by changing their length.
  • Bump steer adjustment.
    Possibility to adjust bump steer by changing rod end location in a slot.
  • Anti-squat adjustment possibility.
    Possibility to adjust anti-squat by changing the top forward link height on upright. It can be done in less than 10 minutes at the trackside. Lowering link would increase anti-squat, raising it would decrease anti-squat.
  • Original wheelspeed sensor (ABS sensor) can be used.
  • Only takes either M model or 336mm or bigger brake discs.
    Smaller brakes will not fit.
  • Wheel bearing size should be 45x85x41

Kit includes:

  • Pre-set suspension links.
  • Uprights with hardware.
  • Subframe bushings with sperical bearings.

Component fitment

  • Wheel bearing: OEM rear wheel bearing can not be used, it has to be sourced from BMW E90. Only the bigger size wheel bearing can be used 45x85x41. Part number 33416775842.
  • Wheel hub: Wheel hub has to be sourced from BMW E90 and shoulde be for the bigger wheel bearing. Part number 33416760058.
  • Wheels: Wheel hub has 5x120 PCD. This means that OEM wheels can not be used.
  • Brakes: Brakes has to be from BMW E90 with 336 mm brake disc or BMW E90 M3. OEM brakes do not fit.
  • Strut: OEM fitment ride hight adjustable coilovers must be used.
  • Driveshaft has to be from BMW E90 or E90 M3 or an aftermarket one that fits E90
More Information
Make Toyota
Field Drift
Placement Rear
Prodmaster Name Suspension Drop Knuckle Kit
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"

Spare parts

All
Complete parts
Left Knuckle
Right Knuckle
Suspension Arm #3
Suspension Arm #4
Suspension Arm #6
Suspension Mod Arm #7

Complete parts

Complete parts

1
Knuckle
Left
WF901_100LA
310.00€
excluding VAT
Right
WF901_100RA
310.00€
excluding VAT
3
Suspension Arm #3
WF221_300A
210.00€
excluding VAT
4
Suspension Arm #4
WF221_400A
145.00€
excluding VAT
5
Suspension Arm #6
WFA91_600A
220.00€
excluding VAT
6
Suspension Mod Arm #7
WF901_710A
215.00€
excluding VAT

Left Knuckle

Left Knuckle

1
Knuckle
Left
WF901_100LA
310.00€
excluding VAT
2
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
B01110150035R3SD933
2.80€
excluding VAT
3
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
6.30€
excluding VAT
4
Washer Flat M12 ZN DIN125
B03112NAZD125
1.50€
excluding VAT
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
1.50€
excluding VAT
6
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
2.80€
excluding VAT
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
1.50€
excluding VAT
8
Washer Flat M10 ZN DIN125
B03110NAZD125
1.50€
excluding VAT
9
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
B01110150055R3SD931
2.80€
excluding VAT
11
Bolt Hex M10x1.5x 45 RH 10.9 ST DIN 931
B01110150045R3SD931
2.80€
excluding VAT
13
Brake Adapter
WF901_121
10.00€
excluding VAT
14
Pin Spring 6x10 Normal ST DIN1481
B05206010NSD1481
1.50€
excluding VAT
15
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
1.50€
excluding VAT
16
Washer Flat M 8 ZN DIN125
B03108NAZD125
1.50€
excluding VAT
17
Bolt Hex M 8x1.25x 45 RH 8.8 ZN DIN 931
B01108125045R2ZD931
1.50€
excluding VAT

Right Knuckle

Right Knuckle

1
Knuckle
Right
WF901_100RA
310.00€
excluding VAT
2
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
B01110150035R3SD933
2.80€
excluding VAT
3
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
6.30€
excluding VAT
4
Washer Flat M12 ZN DIN125
B03112NAZD125
1.50€
excluding VAT
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
1.50€
excluding VAT
6
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
2.80€
excluding VAT
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
1.50€
excluding VAT
8
Washer Flat M10 ZN DIN125
B03110NAZD125
1.50€
excluding VAT
9
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
B01110150055R3SD931
2.80€
excluding VAT
11
Bolt Hex M10x1.5x 45 RH 10.9 ST DIN 931
B01110150045R3SD931
2.80€
excluding VAT
13
Brake Adapter
WF901_121
10.00€
excluding VAT
14
Pin Spring 6x10 Normal ST DIN1481
B05206010NSD1481
1.50€
excluding VAT
15
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
1.50€
excluding VAT
16
Washer Flat M 8 ZN DIN125
B03108NAZD125
1.50€
excluding VAT
17
Bolt Hex M 8x1.25x 45 RH 8.8 ZN DIN 931
B01108125045R2ZD931
1.50€
excluding VAT

Suspension Arm #3

Suspension Arm #3

1
Suspension Arm #3
WF221_300A
210.00€
excluding VAT
2
Spacer ID12 OD14 h14
WF113_905
8.40€
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
21.00€
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
2.80€
excluding VAT
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
B02312150R2ZD936/439
2.80€
excluding VAT
6
Spacer ID10 OD12 h14
WF080_906
8.40€
excluding VAT
7
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
21.00€
excluding VAT

Suspension Arm #4

Suspension Arm #4

1
Suspension Arm #4
WF221_400A
145.00€
excluding VAT
2
Spacer ID12 OD14 h14
WF113_905
8.40€
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
21.00€
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
2.80€
excluding VAT
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
B02312150R2ZD936/439
2.80€
excluding VAT
6
Spacer ID10 OD12 h 7
WF862_902
7.30€
excluding VAT
7
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
21.00€
excluding VAT

Suspension Arm #6

Suspension Arm #6

1
Suspension Arm #6
WFA91_600A
220.00€
excluding VAT
2
Spacer ID12 OD16 h13.5
WFGD4_904
8.40€
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
26.00€
excluding VAT
4
Double Adjuster Female/Male M16x1.5 M22x1.5
WF700_906
15.00€
excluding VAT
5
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
B01108125025R4SD933
1.50€
excluding VAT
6
C-Clip InternalSTD d26 ST DIN472
B04126SD472
1.50€
excluding VAT
7
Spacer ID10 OD12 h14
WF080_906
8.40€
excluding VAT
8
Spherical ID12/OD26
SSPHERICAL 12/26
23.00€
excluding VAT

Suspension Mod Arm #7

Suspension Mod Arm #7

1
Suspension Mod Arm #7
WF901_710A
215.00€
excluding VAT
2
Spacer ID10 OD14 h11
WF013_901
7.30€
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
21.00€
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
2.80€
excluding VAT
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
B02312150R2ZD936/439
2.80€
excluding VAT
6
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
21.00€
excluding VAT
7
Spacer ID10 OD12 h 7
WF862_902
7.30€
excluding VAT