Lexus XE10 Front Drift Angle Lock kit

$2,200.00
excluding VAT
In stock
SKU
WFIS0
or View Spares

The first-generation Lexus IS a.k.a. Toyota Altezza has been around for decades. Nevertheless, this popular chassis is still widely used all over the world by many car enthusiasts due to its relatively light weight, good handling and suitable wheelbase for drifting. In response to customer requests, we have decided to develop a PRO level drift angle kit for it. It has been tested in Europe and USA by some of the best drivers and we are happy to finally offer this product to our customers.

All the metal components on Wisefab Lexus IS front suspension are made of high strength steel, including sheet metal components, tubes, tube ends and rod ends. All the parts are manufactured and assembled in our production facility in Europe.

This kit requires overfenders! Want to see how Wisefab kit fits to your car? Check out our FITMENT CALCULATOR

Recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -4 (+-0.5)
Caster: 5.4 (+-0.5)

 

▼Click the link below for all the details and unique features▼

 

  • 65+ degrees of steering angle, parallel steering, adjustable lock-stopper. You can tune your steering geometry either towards positive or negative Ackermann in just a few minutes even at trackside without messing up an alignment. Ackermann adjustment kit is included.
  • Steering rack has been relocated to improve Ackermann curve which resulted as more usable angle with better feel and precise handling. Relocating the steering rack will eliminate the need for rack offset spacers which means more rigid and precise handling.
  • Easily adjustable one-piece lower control arm desing.
    Lower links are replaced with one arm. When drifting with higher steering angle the stiffness and packaging would become an issue. Therefore lower one-piece control arm is used. Our "double adjuster" allows you to easyly and quickly fine tune your setup.
  • Unique „upside-down“ upper control arm design that offers more clearance for suspension components to avoid any possible interference with the chassis. It also has „double adjusters“ for convenient camber and caster adjustment.
  • Higher roll center (RC).
    On Wisefab knuckle add-on, joints are dropped, which brings the front RC up on lowered car, providing higher roll stiffness and improves drivability.
  • Very good camber control and minimal bump steer with high steering angle.
    On drift cars the dynamic camber and bump steer is much more important than static. With our kinematics we have assured that the camber would provide very good front grip and bump steer is minimal at all the range of steering.
  • Steering jacking control.
    During drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. We have changed the geometry so that it helps to prevent any handling issues.
  • Consistent and predictable self-alignment torque.
    Caster is not the only important parameter to provide sufficient self-alignment torque especially at high angle. It’s the combination of different parameters to maintain consistent trail and self-alignment torque. With our setup the steering wheel turns always to the direction of movement and doesn’t get stuck at full lock. 
  • Original wheelspeed sensor (ABS sensor) can be used.

Kit includes

  • Steering rack relocation hardware (FD legal).
  • Knuckle add-ons with hardware.
  • Lower control arms.
  • Upper control arms
  • Assembeled tie rods.
  • Installation guide.
More Information
Make Lexus
Field Drift
Placement Front
Prodmaster Name Drift Angle Lock kit
Wisefab fitment calculator
Make and Model
?
Fender Arch Height from Ground (mm)
Tire Width
Tire Height or Diameter
Rim Diameter
Rim Width
ET
Wheelspacer (mm)
Suspension selection
Suspension selection
OEM
WISEFAB
CUSTOM
 
1720 mm
1720 mm
Fender to Fender
1570 mm
1741 mm
Hub to Hub
0 °
-4 °
Camber
0 °
5 °
Caster
0 mm
-2 mm
Toe

Set your desired rim and tire parameters in our fitment calculator to have a better overview how Wisefab will transform your driftcar. Fender arch height is your indicator on ride height. Check the fitment and learn about missing fender gap before ordering widebody kit. In the custom section you can edit the fender to fender and wheelhub to wheelhub measurments according to your driftcar. Use the max width to check if your car will fit on your trailer. Have fun with this fitment calculator.

Spare parts

All
Complete parts
Right Knuckle
Left Knuckle
Right Lower Arm
Left Lower Arm
Upper Arm
Tie Rod
Rack Relocation

Complete parts

Complete parts

1
Knuckle
Right
WFIS0_100RA
$330.00
excluding VAT
Left
WFIS0_100LA
$330.00
excluding VAT
2
Lower Arm
Right
WFIS0_200RA
$590.00
excluding VAT
Left
WFIS0_200LA
$590.00
excluding VAT
3
Upper Arm
WFIS0_300A
$440.00
excluding VAT
4
Tie Rod
WFIS0_600A
$105.00
excluding VAT
5
Rack Relocation
WFIS9_100A
$395.00
excluding VAT

Right Knuckle

Right Knuckle

3
Bolt Allen M12x1.25x 60 RH 12.9 ST DIN912
B01212125060R4SD912
$11.00
excluding VAT
4
Ackermann Washer Round 0 offset
WF013_140
$11.00
excluding VAT
5
Ackermann Washer Round 3 Offset
WF080_142
$11.00
excluding VAT
6
Ackermann Washer Round 6 Offset
WF080_144
$11.00
excluding VAT
7
BushingT ID 8 OD22 h41 Excentric Lock Stopper
WF350_950
$18.00
excluding VAT
8
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT
9
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$9.40
excluding VAT
10
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT
11
Washer Flat M 8 ZN DIN125
B03108NAZD125
$2.30
excluding VAT
12
Bolt Hex M 8x1.25x 70 RH 8.8 ZN DIN 931
B01108125070R2ZD931
$2.30
excluding VAT
13
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
$2.30
excluding VAT
14
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
B01110150070R3SD931
$4.30
excluding VAT
15
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
16
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$2.30
excluding VAT
17
Bolt Allen M12x1.25x 50 RH 12.9 ST DIN 912
B01212125050R4SD912
$11.00
excluding VAT

Left Knuckle

Left Knuckle

3
Bolt Allen M12x1.25x 60 RH 12.9 ST DIN912
B01212125060R4SD912
$11.00
excluding VAT
4
Ackermann Washer Round 0 offset
WF013_140
$11.00
excluding VAT
5
Ackermann Washer Round 3 Offset
WF080_142
$11.00
excluding VAT
6
Ackermann Washer Round 6 Offset
WF080_144
$11.00
excluding VAT
7
BushingT ID 8 OD22 h41 Excentric Lock Stopper
WF350_950
$18.00
excluding VAT
8
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT
9
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$9.40
excluding VAT
10
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT
11
Washer Flat M 8 ZN DIN125
B03108NAZD125
$2.30
excluding VAT
12
Bolt Hex M 8x1.25x 70 RH 8.8 ZN DIN 931
B01108125070R2ZD931
$2.30
excluding VAT
13
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
$2.30
excluding VAT
14
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
B01110150070R3SD931
$4.30
excluding VAT
15
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
16
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$2.30
excluding VAT
17
Bolt Allen M12x1.25x 50 RH 12.9 ST DIN 912
B01212125050R4SD912
$11.00
excluding VAT

Right Lower Arm

Right Lower Arm

3
Control Arm Rear Fixing
WF8601_210A
$195.00
excluding VAT
4
Spacer ID10 OD14 h14.5
WFIS0_908
$23.00
excluding VAT
5
Spacer ID12 OD16 h 4.5
WF144_903
$13.00
excluding VAT
6
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
7
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
8
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT
9
Washer FlatLarge M12 ZN SFS3738
B03512ZSFS3738
$2.30
excluding VAT
10
Bolt Allen M12x1.25x 50 RH 12.9 ST DIN 912
B01212125050R4SD912
$11.00
excluding VAT
11
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
13
Spacer ID12 OD16 h10
WF013_903
$13.00
excluding VAT
14
Spacer ID14 OD16 h15
WF180_908
$13.00
excluding VAT

Left Lower Arm

Left Lower Arm

3
Control Arm Rear Fixing
WF8601_210A
$195.00
excluding VAT
4
Spacer ID10 OD14 h14.5
WFIS0_908
$23.00
excluding VAT
5
Spacer ID12 OD16 h 4.5
WF144_903
$13.00
excluding VAT
6
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
7
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
8
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT
9
Washer FlatLarge M12 ZN SFS3738
B03512ZSFS3738
$2.30
excluding VAT
10
Bolt Allen M12x1.25x 50 RH 12.9 ST DIN 912
B01212125050R4SD912
$11.00
excluding VAT
11
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
13
Spacer ID12 OD16 h10
WF013_903
$13.00
excluding VAT
14
Spacer ID14 OD16 h15
WF180_908
$13.00
excluding VAT

Upper Arm

Upper Arm

2
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT
3
Double Adjuster Female/Male M16x1.5 M22x1.5 Allen
WF452_906
$38.00
excluding VAT
4
Double Adjuster Locknut M16x1.5 Allen
WF452_907
$20.00
excluding VAT
5
Spherical ID12/OD26
SSPHERICAL 12/26
$35.00
excluding VAT
6
C-Clip InternalSTD d26 ST DIN472
B04126SD472
$2.30
excluding VAT
7
Washer Flat M 8 ZN DIN125
B03108NAZD125
$2.30
excluding VAT
8
Bolt Hex M 8x1.25x 40 RH 8.8 ZN DIN 931
B01108125040R2ZD931
$2.30
excluding VAT
9
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
$2.30
excluding VAT
10
Spacer ID10 OD14 h14.5
WFIS0_910
$13.00
excluding VAT
11
Straight Bolt M12X1.5X26 D12 hmisa
WFIS0_902
$35.00
excluding VAT
12
Bolt Allen M8X1.25X12.5 RH 12.9 ZN
WFIS0_904
$35.00
excluding VAT
13
Special Nut M12X1.5 Lexus
WFIS0_905
$23.00
excluding VAT

Tie Rod

Tie Rod

2
Rod end 14x1.5 RH female CrMo
SRODEND14X1.5 RH F
$39.00
excluding VAT
3
Tie Rod Inner M14x1.5 M14x1.5 L400
STIEROD_M14_M14_L400
$31.00
excluding VAT
5
Spacer ID10 OD14 h11
WF013_901
$11.00
excluding VAT

Rack Relocation

Rack Relocation

2
Lexus IS Front Subframe Washer
WFIS9_106
$6.40
excluding VAT
3
BushingK ID14.5 OD29 h52
WFIS9_903
$35.00
excluding VAT
4
Toyota Chaser Front Subframe Washer
WFIS9_109
$11.00
excluding VAT
5
Lexus IS Front Steering Rack Bushing
WFIS9_901
$20.00
excluding VAT
6
Lexus IS Front Steering Rack Insert Sleeve
WFIS9_902
$20.00
excluding VAT
7
Bolt Hex M14x1.5x 70 RH 10.9 ST DIN 960
B01114150070R3SD960
$9.40
excluding VAT
8
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
B01110150070R3SD931
$4.30
excluding VAT
9
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$4.30
excluding VAT
10
Bolt HexFlange M10x1.5x 20 RH 10.9 ST DIN6921
B01610150020R2SD6921
$4.30
excluding VAT
11
V2 Steering Column Extender Assembly
WF149_040A
$125.00
excluding VAT
12
Bolt Hex M10x1.25x 40 RH 10.9 ST DIN 960
B01110125040R3SD960
$4.30
excluding VAT
13
Washer Flat M10 ZN DIN125
B03110NAZD125
$2.30
excluding VAT
14
BushingT ID10 OD18 h10
WF901_904
$11.00
excluding VAT
15
WasherT_10.2_34_h3
WFIS9_108
$6.40
excluding VAT
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"