Infiniti G35 Front Drift Angle Lock Kit with Rack Relocation

2,250.00€
excluding VAT
In stock
SKU
WF350 INS
or View Spares

Wisefab Infiniti G35 front suspension kit with rack relocation is about the same weight as original aluminium suspension. All the metal components on G35 front suspension kit are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Rod ends and spherical bearings are used, no rubber bushings. Lower control arms are one piece design with shock motion ratio. Scroll down and order your spare parts here.

Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!

Check out the Infiniti G35 Rear Suspension kit.

Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -3,7 +/-0,3
Caster: 6,3 +/-0,3

Read full description
  • 65 degrees of lock, parallel steering.
    You could tune your steering geometry either towards positive or negative Ackermann in just a few minutes even at trackside without messing up an alignment. Ackermann adjustment kit included.
  • This kit includes rack relocation hardware. By modifying the front subframe seering rack will be moved forward to improve Ackermann curve and eliminate the need for rack offset spacers which means more rigid and precise handling.
  • Adjustable lock stopper.
  • One piece lower control arm desing. 
    2 lower links would have some benefits for circuit racing, but for drifting with higher steering angle the stiffness and packaging would become an issue. Therefore lower one piece arm is used.
  • Higher roll center (RC).
    On Wisefab knuckle, both joints are dropped, which brings the front RC up on lowered car, providing higher roll stiffness and enabling to remove the front anti roll bar (sway bar) that is quite difficult to package with that high lock angles. 
  • Very good camber control and minimal bump steer with high steering angles.
    On drift cars the dynamic camber and bump steer is much more important than static. With Wisefab kinematics we have assured that the camber would provide very good front grip and bump steer is minimal at all the range of steering.
  • Steering jacking control.
    During drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. We have changed the geometry that it doesn’t cause any handling issues.
  • Consistent and predictable self-alignment torque.
    Caster is not the only important parameter to provide sufficient self-alignment torque especially at high lock. It’s the combination of different parameters to maintain consistent trail and self-alignment torque. With our setup the steering wheel turns always to the direction of movement and doesn’t get stuck at full lock. 
  • Adjustable spring and shock absorber motion ratio.
    The shock lower bracket has 3 attachment possibilities, which allows to change suspension stiffness and handling very quickly.

 

Kit includes:

  • Pre-set upper and lower control arms.
  • Rack relocation kit.
  • Knuckles with hardware.
  • Assembeled tie rods.
  • Installation guide.

 

Other components, packaging and clearance.

  • This kit assumes coilovers to have enough clearance.
  • Ride height is designed to be ~80mm from front subframe to ground.
  • Dependent on rim width and ET, wider fenders or fender flares would be needed. Inner wheel wells do not need to be modified with tire diameter up to 635mm (215/45R17, 225/45R17, 235/40R17, 225/40R18 etc).
  • Minimum rim diameter is 17”.
  • Recommended backspacing is ~135mm (7“ ET45; 8“ ET35; 9“ ET20). If ET is smaller, then wheels stay more outwards, if ET is bigger, then spacers need to be used.
  • The kit is designed and manufactured the way that after installation and toe adjustment it’s ready to use right away.
More Information
Make Infiniti
Field Drift
Placement Front
Prodmaster Name Drift Angle Lock Kit with Rack Relocation
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"

Spare parts

All
Complete parts
Left Knuckle
Right Knuckle
Left Lower Control Arm
Right Lower Control Arm
Upper Control Arm
Tie Rod Assembly
Hub Center Ring
Rack Relocation Insert Assembly
Rack Relocation Jig Assembly

Complete parts

Complete parts

1
Knuckle
Left
WF370_100LA
530.00€
excluding VAT
Right
WF370_100RA
530.00€
excluding VAT
2
Lower Control Arm
Left
WF350_200LA
390.00€
excluding VAT
Right
WF350_200RA
390.00€
excluding VAT
3
Upper Control Arm
WF370_300A
230.00€
excluding VAT
4
Tie Rod Assembly
WF350_600A
70.00€
excluding VAT
5
Hub Center Ring
WF350_907
18.00€
excluding VAT
6
Rack Relocation Insert Assembly
WF359_100A
305.00€
excluding VAT
7
Rack Relocation Jig Assembly
WF359_120A
90.00€
excluding VAT

Left Knuckle

Left Knuckle

1
Knuckle
Left
WF370_100LA
530.00€
excluding VAT
2
Bolt Allen M12x1.25x 50 RH 12.9 ST DIN 912
B01212125050R4SD912
7.90€
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
1.60€
excluding VAT
4
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
B01110150070R3SD931
3.00€
excluding VAT
5
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
1.60€
excluding VAT
6
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
1.60€
excluding VAT
7
Ackermann Washer Round 0 offset
WF013_140
7.90€
excluding VAT
8
Ackermann Washer Round 3 Offset
WF080_142
7.90€
excluding VAT
9
Ackermann Washer Round 6 Offset
WF080_144
7.90€
excluding VAT
10
Bolt Hex M 8x1.25x 70 RH 8.8 ZN DIN 931
B01108125070R2ZD931
1.60€
excluding VAT
11
Washer Flat M 8 ZN DIN125
B03108NAZD125
1.60€
excluding VAT
12
BushingT ID 8 OD22 h51 Excentric Lock Stopper
WF370_950
12.00€
excluding VAT
14
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
6.80€
excluding VAT
15
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
1.60€
excluding VAT
16
Single Share Mount ID 8 OD12
WF700_903
27.00€
excluding VAT
17
Bolt Allen M 8x1.25x 62.5 RH 12.9 ZN SPC
WF700_904
25.00€
excluding VAT
18
Bolt Allen M 8x1.25x 12 RH 12.9 ST DIN 912
B01208125012R4SD912
1.60€
excluding VAT

Right Knuckle

Right Knuckle

1
Knuckle
Right
WF370_100RA
530.00€
excluding VAT
2
Bolt Allen M12x1.25x 50 RH 12.9 ST DIN 912
B01212125050R4SD912
7.90€
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
1.60€
excluding VAT
4
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
B01110150070R3SD931
3.00€
excluding VAT
5
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
1.60€
excluding VAT
6
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
1.60€
excluding VAT
7
Ackermann Washer Round 0 offset
WF013_140
7.90€
excluding VAT
8
Ackermann Washer Round 3 Offset
WF080_142
7.90€
excluding VAT
9
Ackermann Washer Round 6 Offset
WF080_144
7.90€
excluding VAT
10
Bolt Hex M 8x1.25x 70 RH 8.8 ZN DIN 931
B01108125070R2ZD931
1.60€
excluding VAT
11
Washer Flat M 8 ZN DIN125
B03108NAZD125
1.60€
excluding VAT
12
BushingT ID 8 OD22 h51 Excentric Lock Stopper
WF370_950
12.00€
excluding VAT
14
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
6.80€
excluding VAT
15
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
1.60€
excluding VAT
16
Single Share Mount ID 8 OD12
WF700_903
27.00€
excluding VAT
17
Bolt Allen M 8x1.25x 62.5 RH 12.9 ZN SPC
WF700_904
25.00€
excluding VAT
18
Bolt Allen M 8x1.25x 12 RH 12.9 ST DIN 912
B01208125012R4SD912
1.60€
excluding VAT

Left Lower Control Arm

Left Lower Control Arm

1
Lower Control Arm
Left
WF350_200LA
390.00€
excluding VAT
2
Spacer ID14 OD18 h 3.5
WF370_908
7.90€
excluding VAT
3
Rod end 18x1.5 RH male CrMo
SRODEND18X1.5 RH M
34.00€
excluding VAT
4
BushingT ID20 OD29 h52 SPC
WF350_902
12.00€
excluding VAT
6
Spacer ID14 OD18 h28
WF350_918
9.10€
excluding VAT
7
Spacer ID14 OD18 h23.5
WF370_907
9.10€
excluding VAT
8
Bolt Hex M10x1.5x 40 RH 10.9 ST DIN 931
B01110150040R3SD931
3.00€
excluding VAT
9
Washer Flat M10 ZN DIN125
B03110NAZD125
1.60€
excluding VAT
10
Lower Control Arm Mount
WF452_220A
220.00€
excluding VAT
11
Spacer ID12 OD16 h11.9
WF113_903
9.10€
excluding VAT
12
Spacer ID12 OD16 h 8.5
WF351_904
7.90€
excluding VAT
13
Spacer ID12 OD16 h18
WF136_903
9.10€
excluding VAT
14
C-Clip InternalSTD d32 ST DIN472
B04132SD472
1.60€
excluding VAT
15
Spherical ID16/OD32
SSPHERICAL 16/32
27.00€
excluding VAT

Right Lower Control Arm

Right Lower Control Arm

1
Lower Control Arm
Right
WF350_200RA
390.00€
excluding VAT
2
Spacer ID14 OD18 h 3.5
WF370_908
7.90€
excluding VAT
3
Rod end 18x1.5 RH male CrMo
SRODEND18X1.5 RH M
34.00€
excluding VAT
4
BushingT ID20 OD29 h52 SPC
WF350_902
12.00€
excluding VAT
6
Spacer ID14 OD18 h28
WF350_918
9.10€
excluding VAT
7
Spacer ID14 OD18 h23.5
WF370_907
9.10€
excluding VAT
8
Bolt Hex M10x1.5x 40 RH 10.9 ST DIN 931
B01110150040R3SD931
3.00€
excluding VAT
9
Washer Flat M10 ZN DIN125
B03110NAZD125
1.60€
excluding VAT
10
Lower Control Arm Mount
WF452_220A
220.00€
excluding VAT
11
Spacer ID12 OD16 h11.9
WF113_903
9.10€
excluding VAT
12
Spacer ID12 OD16 h 8.5
WF351_904
7.90€
excluding VAT
13
Spacer ID12 OD16 h18
WF136_903
9.10€
excluding VAT
14
C-Clip InternalSTD d32 ST DIN472
B04132SD472
1.60€
excluding VAT
15
Spherical ID16/OD32
SSPHERICAL 16/32
27.00€
excluding VAT

Upper Control Arm

Upper Control Arm

1
Upper Control Arm
WF370_300A
230.00€
excluding VAT
2
Spacer ID10 OD14 h15.5
WF370_901
9.10€
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
23.00€
excluding VAT
4
Double Adjuster Female/Male M16x1.5 M22x1.5 Allen
WF452_906
27.00€
excluding VAT
5
C-Clip InternalSTD d26 ST DIN472
B04126SD472
1.60€
excluding VAT
6
Spherical ID12/OD26
SSPHERICAL 12/26
25.00€
excluding VAT

Tie Rod Assembly

Tie Rod Assembly

1
Tie Rod Assembly
WF350_600A
70.00€
excluding VAT
2
Tie Rod Inner M14x1.5 M14x1.5 L366
STIEROD_M14_M14_L366
23.00€
excluding VAT
3
Rod end 14x1.5 RH female CrMo
SRODEND14X1.5 RH F
28.00€
excluding VAT
4
Spacer ID10 OD14 h13
WF370_909
9.10€
excluding VAT

Hub Center Ring

Image currently unavailable

Hub Center Ring

1
Hub Center Ring
WF350_907
18.00€
excluding VAT

Rack Relocation Insert Assembly

Rack Relocation Insert Assembly

1
Rack Relocation Insert Assembly
WF359_100A
305.00€
excluding VAT
2
Subframe Brace Washer
WF359_109
4.60€
excluding VAT
3
Rack Clamp
WF359_110
46.00€
excluding VAT
4
Rack Relocation Bushing
WF359_908
21.00€
excluding VAT
5
Lexus IS Front Steering Rack Insert Sleeve
WFIS9_902
14.00€
excluding VAT
6
Rack Extender M14x1.5 M16x1.0 L24
WFR70_905
21.00€
excluding VAT
7
Rack Solenoid Delete Fitting
WF359_914
16.00€
excluding VAT
8
V2 Steering Column Extender Assembly
WF149_040A
145.00€
excluding VAT
9
Rack Bushing Washer
WF359_107
4.60€
excluding VAT
10
Washer Flat M10 ZN DIN125
B03110NAZD125
1.60€
excluding VAT
11
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
4.60€
excluding VAT
12
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
B01110150070R3SD931
3.00€
excluding VAT

Rack Relocation Jig Assembly

Image currently unavailable

Rack Relocation Jig Assembly

1
Rack Relocation Jig Assembly
WF359_120A
90.00€
excluding VAT